Mobile Devices Setup - Kguard BR401 User Manual

Mobile Devices Setup

The DVR provides remote access using your mobile phone or a tablet PC. See the "DVR SHA / NS series Support
Manual" in the enclosed CD for the list of supported mobile devices.
Before using this feature, make sure the DVR is connected to the Internet.
To configure mobile device setup, do the following:
1
On the Main Menu, click Remote Setting.
2
On the left panel, click Network > Mobile. The Mobile screen appears.
3
Enter the User Name and Password you use to login to the DVR.
4
On Mobile Port, enter the monitoring port of your mobile device. The port range is between 1024 to 65535.
Note:
The Mobile Port specified here must be the same port on your mobile device.
5
After all settings are complete, click Save.
« TIP »
To cancel any modifications and retain the existing settings, click Refresh.
After performing the above procedures, install the Kguard mobile device utility on your mobile device.
See "Chapter 6: Using KView Series Software" on page 102
Chapter 5: KGUARD Web Client
for further details.
DVR User's Manual
89