Setting The Alarm Notification (16-Channel Only) - Kguard BR401 User Manual

Chapter 5: KGUARD Web Client
7
Modify the necessary settings:
Menu item
Sensitivity
Buzzer
Full Screen
Alarm Out
Dwell Time
Enable Record
Post Recording
Record Channel
Show Message
Send Email
8
To save the settings, click Apply at the bottom of the screen.
When motion detection is enabled on a channel, the motion detection icon
on the monitor connected to the DVR.

Setting the Alarm Notification (16-Channel only)

1
On the Main Menu, click Remote Setting.
2
On the left panel, click Alarm > Alarm. The Alarm screen appears.
3
Modify the necessary settings:
Menu item
Alarm In
Alarm Type
Buzzer
Dwell Time
DVR User's Manual
92
Description
Select the motion detection sensitivity rate. Options are : 1~8, wherein "8" is the
most sensitive and "1" is the least sensitive.
Set the buzzer duration when motion is detected (Off/10 S/20 S/40 S/60 S).
To disable buzzer, select Off.
Check the box to enable this function. If this function is enabled and the alarm is
triggered, the corresponding channel will be displayed in full screen.
If an alarm device is connected, check the box to make the device sound the alarm
when triggered.
Select the alarm sound duration (10S/20S/40S/60S) then check to apply the setting.
Check the box to enable the post recording option.
Select the post recording duration. Enable Record must be checked to use this
function.
Check the box to enable recording of all or selected channels once motion detection is
triggered. Then, select the channels to record.
Check the box to display a message on screen when the alarm is triggered.
Check to enable email alarm notification. If the function is enabled, the system will
send the alarm images to the specified email address.
Description
Select the channel that will trigger the alarm.
Select the alarm type: NO (Normal-Open), NC (Normal-Close), or OFF.
Set the buzzer duration when alarm is triggered (Off/10 S/20 S/40 S/60 S).
To disable the buzzer, select Off.
Select the alarm sound duration of the I/O alarm device (10S/20S/40S/60S) then check
to apply the setting to each alarm type.
appears on the channel screen shown
M