Page 4
Contents 5.2 The Interface ........................55 ........................56 ..................56 ..................56 .................. 57 Recording Channels Manually ................57 Taking Snapshots ....................57 Using PTZ Controls ....................57 5.4 Searching and Playing Recorded Videos ................58 5.4.1 Searching and Playing Videos ................58 ................
Page 5
Preface for any errors and omissions that may have occurred. Reorient or relocate the receiving antenna. 1. This device may not cause harmful interference. infringement of a third party’s rights. DVR User’s Manual...
Page 6
Preface electrical ground. The added voltages increase the severity of electric shock hazard. DVR User’s Manual...
Page 7
Chapter 1: Product Overview - 1 built-in BNC video output PTZ control via built-in RS-485 port Up to 2 TB SATA HDD Remote Control Mouse BNC to RCA Cable DVR User’s Manual...
Page 8
16 17 No. Icon Search Press to display the pop-up menu. Mute Previous channel Play Press to enter Playback mode or play recorded videos. Pause Press to pause the video playback or enter the frame-playback mode. Stop Press to stop the video playback or stop manual recording. Record Press to start manual recording.
Page 9
16 17 No. Icon Channel 1 Press to display Channel 1 into full screen. Channel 2 Press to display Channel 2 into full screen. Channel 3 Press to display Channel 3 into full screen. Channel 4 Press to display Channel 4 into full screen. Quad Play Press to enter Playback mode or play recorded video.
Page 10
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK. DO NOT OPEN COVERS. NO USER DC 12V SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE WARNING: TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE UNITS NOT SPECIFICALLY DESIGNED FOR OUTDOOR USE TO RAIN OR MOISTURE.
Page 11
Icon Numeric keys Press to display channel 1-8. Numeric keys Press to display all channels. MENU MENU Press to enter the selected menu item and edit the AUDIO/ MUTE SEARCH Press to play recorded video or enter recording search menu. Press to start manual recording.
Page 13
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK. DO NOT OPEN COVERS. NO USER DC 12V SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE WARNING: TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE UNITS NOT SPECIFICALLY DESIGNED FOR OUTDOOR USE TO RAIN OR MOISTURE.
Page 14
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK. DO NOT OPEN COVERS. NO USER DC 12V SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE WARNING: TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE UNITS NOT SPECIFICALLY DESIGNED FOR OUTDOOR USE TO RAIN OR MOISTURE.
Page 15
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK. DO NOT OPEN COVERS. NO USER DC 12V SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE WARNING: TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE UNITS NOT SPECIFICALLY DESIGNED FOR OUTDOOR USE TO RAIN OR MOISTURE.
Page 16
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK. DO NOT OPEN COVERS. NO USER DC 12V SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE WARNING: TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE UNITS NOT SPECIFICALLY DESIGNED FOR OUTDOOR USE TO RAIN OR MOISTURE.
Page 17
for further details. Note: Select > > You can also access the main menu by pressing the key on the front panel. DVR User’s Manual...
Page 18
There are four types of recording indicator on the main screen of each channel. page 28 Recording indicator Icon Note: ] icon or [ ] icon appears Hard disk drive memory is full. on the screen. If [ Cannot detect hard disk drive. Video recording is in progress.
Page 19
a. Full keyboard Click to delete a character. Click to toggle the keyboard to upper case. b. Number keypad Click to delete a number. Select > > Click OK. DVR User’s Manual...
Page 20
Enter User Name > is enabled. page PTZ: Use the PTZ control. See page PIP: display. See page 23. Search for recorded videos to play back. See page > is disabled. page page page 27. > is disabled and PTZ camera cruise starts.
Page 21
Right-click on the mouse and select Press the Press the key on the front panel. seconds on the front panel. MENU DVR User’s Manual...
Page 23
screen. Pop-up menu. Select Pop-up menu. Select First channel Second channel Note: If you select DVR User’s Manual...
Page 24
Select Full screen Full screen Note: The displayed screens vary depending on the available channels. Right-click on the mouse to display the Pop-up menu. Select DVR User’s Manual...
Page 25
Select PTZ. The PTZ control panel appears on the screen. Icon Pointer pan mode. Zoom Focus Iris Speed Channel Select Click to select the channel of the PTZ camera. Goto Preset Point Set Preset Point camera. Note: You can set up to 255 preset bits for the varies depending on the PTZ camera performance.
Page 26
Right-click on the mouse to display the Pop-up menu. Select Zoom area Note: DVR User’s Manual...
Page 27
manually stop the recording. Select The video recording starts. Right-click on the mouse to display the Pop-up menu. Select The video recording stops. Select GUI on BNC. DVR User’s Manual...
Page 28
Select > Channel Channel Title screen. Color Double-click to enter Color submenu. Live DVR User’s Manual...
Page 29
Select > Channel Color Select > Channel Note: If the frame rate is set to DVR User’s Manual...
Page 31
Note: complete the setup. Select > Specify the numbers. DVR User’s Manual...
Page 32
frames inside Ethernet frames. Select > Specify the numbers. Specify the IP address. Note: Select > Specify the numbers. IP address IP addresses. DVR User’s Manual...
Page 34
Click to see if the port is open or not. DVR User’s Manual...
Page 35
* If the port forwarded is successful, the following message will appear on the screen. * If the port forwarded failed, the following message will appear on the screen. Note: the domain name can be routed to the IP address even if the IP is changed in a dynamic IP system. Select >...
Page 36
Note: Select > Specify the date and click Click Select the channel and click volume level. DVR User’s Manual...
Page 37
Plug a USB device into the USB connector at the front panel or the rear panel of the device. Select > or Previous. selected. Click Note: DVR User’s Manual...
Page 38
Plug a USB device into the USB connector at the front panel or the rear panel of the device. Select > Click Note: DVR User’s Manual...
Page 39
usage. Select > has been selected. Note: Close Select > Click OK to proceed. DVR User’s Manual...
Page 40
Plug a USB device into the USB connector at the front panel or the rear panel of the device. Select > Click OK to proceed. Note: Select > DVR User’s Manual...
Page 41
be triggered. triggered. triggered. Note: Select > Check the Enter the Note: Interval DVR User’s Manual...
Page 42
Note: Test SETUP menu. Select > Set the PTZ Protocol code. Enable or disable Cruise mode. Note: DVR User’s Manual...
Page 43
Select > Set the and User Password Enter the Note: Note: in the enclosed CD. Select > In Channel DVR User’s Manual...
Page 45
Select > Click the for details on using the virtual Select the Click the for details on using the virtual Select the Select > In NTP Select the Click Click to close the menu screen. DVR User’s Manual...
Page 46
Select > Click Select the DVR User’s Manual...
Page 47
Select > Click Select Enable in Click the Password for details on using the Note: DVR User’s Manual...
Page 48
Select > Click Enter the Password and Select > Click Click to check all options or click Clear to deselect all options. DVR User’s Manual...
Page 49
Select > Click Select > > Click Click to close the volume bar. Click DVR User’s Manual...
Page 50
Select > Click In Channel to create 4 masked areas. Click Note: areas you checked in Select > > Select desired language from the list. Click to save. DVR User’s Manual...
Page 51
Select > > Enter desired name for the DVR. The name can be composed of alphanumeric characters. See for details on using the virtual keyboard. Displays the model type of the DVR. page Modify the Click Select > > DVR User’s Manual...
Page 52
Click Click to reboot the DVR. Note: Select > > DVR. Note: set to selected DVR User’s Manual...
Page 54
Chapter 5: KGuard Web Client Enter the and Password. Select language here. Note: The default administrator DVR User’s Manual...
Page 55
Click Note: 8-channel DVR. Live Lists all channels that can be connected to the DVR. Channel Controls PTZ Controls Manages the PTZ speed dome. See on page 57. DVR User’s Manual...
Page 56
screen. Click Click Double-click on the channel. Click Click Double-click again to return to 4-channel grid 9-channel grid grid display. Click . Click again to click shots of a channel. Use the Channel Controls to manage individual channels and the Play Controls to manage all the channels at the same Channel Control Panel DVR User’s Manual...
Page 57
icon on the Play Controls. Click the recording icon on the Play Controls. Recorded videos Click the snapshot icon on the Play Controls to take a snapshot of the current screen. Snapshots are saved in a Pointer auto pan. Iris Click to set the preset point.
Page 58
. The Playback screen appears. . Matching to play the video. . The Playback screen appears. . Matching Click for details on Note: DVR User’s Manual...
Page 60
Channel Enter the desired channel name to be displayed on the screen. Live screen. See 3 Click to copy. DVR User’s Manual...
Page 61
Channel Note: on page 60. DVR User’s Manual...
Page 62
. The Click to display the Schedule screen. Channel for further details. Time Click a space on the grid to mark the schedule. The space changes color depending on the selected record type. Click as many spaces as desired. Alarm recording is set No scheduled recording Normal recording is set day on the To...
Page 63
triggered and the icon is displayed on the screen. triggered. Post DVR User’s Manual...
Page 65
Email. Note: are using and the required parameters to complete the setup. Specify the Note: Enable UPnP Select the Bandwidth. Specify the and the Web Port. Note: Web Port DVR User’s Manual...
Page 66
> . The PPPoE screen appears. Enable Enter the and Password. Note: the domain name can be routed to the IP address even if the IP is changed in a dynamic IP system. > . The DDNS screen appears. Enable DVR User’s Manual...
Page 67
Click Overwrite Note: If Overwrite DVR User’s Manual...
Page 68
> . The PTZ Setup screen appears. Set the PTZ control Protocol Note: Enable or disable Cruise and select a on page 60 . The DVR provides remote access using your mobile phone or a tablet PC. See in the enclosed CD for the list of supported mobile devices.
Page 69
Note: for further details. > Click DVR User’s Manual...
Page 70
Clear on the monitor connected to the DVR. on page 60 . source. . The System Setup screen appears. DVR User’s Manual...
Page 71
can authorize and grant access rights to users. > User. The User screen appears. Enable Password. This makes the Password and Password and Note: Password and must match. DVR User’s Manual...
Page 72
> User. The User screen appears. Select the user account from the table. Enable Password Password and to save. > . The Daylight Saving Time screen appears. DVR User’s Manual...
Page 74
All manual recording made from the Live screen are saved in this path. on page 57. All captured screen shots made from the Live screen are saved in this path. on page 57. DVR User’s Manual...
Page 76
Click the Click Title Enter the desired DVR name. Enter the IP address assigned to the DVR. Enter the server port number that you Port in the DVR menu. See Password in the DVR menu. See Select the number of channels that you Click OK ®...
Page 77
Click Click icon is displayed Click the Click to add a device. Title Enter the desired DVR name. Enter the IP address assigned to the DVR. Enter the server port number that you Port User in the DVR menu. See Password in the DVR menu.
Page 78
capture snapshots to save to tablet PC memory card. ® Tablets Note: Click Click Click the DVR User’s Manual...
Page 79
® Note: Click Click icon is Click the DVR User’s Manual...
Page 80
Note: Select and then click Install. Close. shortcut icon appears on the desktop. Double-click DVR User’s Manual...
Page 81
iPhone Windows 2.2 or above 4.2.1 or above 3.0 or above 4.2.1 or above Monitor Monitor Device List Available for 16 devices Available for 16 devices Available for 4 devices Up to 16 Channels 1 Channel 36 Channels simultaneously PTZ Control PTZ Control Screen Mode Live Snapshot...
Page 82
DVR cannot detect the HDD. support. I have changed the an email to KGUARD at support@kguardsecurity.com. cannot remember it. The remote control is not Make sure nothing is blocking the remote control and the DVR sensor. Aim the remote control at a proper distance.
Page 83
I cannot access the DVR through my mobile phone. phone. Make sure that the mobile server port value is the same as the value set in the DVR menu. See The DVR is hot to the Can the HDD be Is it possible to simultaneously record and playback previously...
Page 84
Video Compression H.264 H.264 Video System BNC 2-channel BNC 2-channel Audio Compression Display Frame Rate Recording Frame Rate Recording Mode Recording Pack Time HDD Interface USB2.0 Playback Local Playback Search Playback Mode Backup PTZ Control Alarm Mode DVR User’s Manual...