Set Motion Detection Area - Kguard BR401 User Manual

Chapter 4: Using the DVR

Set Motion Detection Area

1
In preview mode, right-click on the mouse to display the Pop-up menu.
2
Select Main Menu
3
Click Setup.
4
A grid screen with a green cursor appears. By default, the whole screen is marked for motion detection (red block).
If you want to disable motion detection on an area, click the grid cursor and then drag the mouse to highlight the
scope to unmark the area (transparent block) for motion detection.
5
To close the grid screen, click the right mouse button.
6
After all settings are complete, click Apply.
7
When data saving is complete, click OK.
When motion detection is enabled on a channel, the channel screen displays the motion detection icon
« TIP »
To copy the current settings to other channels, select the channel(s) in Copy To and then click Copy.
DVR User's Manual
56
> ALARM.
.
M