Using Ptz Controls - Kguard BR401 User Manual

3.5 Using PTZ Controls

If you are using a PTZ speed dome camera, you can configure the PTZ control settings.
1
In the preview mode, right-click on the mouse to display the Pop-up menu.
2
Select PTZ.
Note:
This option is not available if the PTZ camera is in Cruise mode. See
3
The PTZ control panel appears on the screen.
Note:
To change the PTZ settings, see
1
2
No. Icon
Channel Select
1
Pointer pan
2
Zoom
Focus
3
Iris
- Time
4
Save
5
Clear
6
Set Preset Point
7
Go to Preset Point
8
- Total
9
- No.
10
Speed
11
"4.6.2 PTZ Setup" on page
11
3
Item
Click to select the channel of the PTZ camera.
Click the direction arrow to select the direction of the PTZ camera.
Click the middle icon to switch to auto pan mode.
Click to zoom in/out.
Click to adjust the focus.
Click to adjust the iris setting.
Set a preset time.
Click to save the settings and preset points.
Click to delete the selected preset.
Click to set a specific preset point on a PTZ camera.
Note:
You can set up to 255 preset bits for the DVR. However, the actual preset
quantity varies depending on the PTZ camera performance.
Click to go to a specific preset point.
Display the total of preset bit.
Set a preset point.
Click to adjust the speed.
Chapter 3: Getting Started
"4.6.2 PTZ Setup" on page
59.
10 9
4 5 6
Function
59.
8
7
DVR User's Manual
35