Advanced Settings; Maintenance Settings; Manual Reboot And Power Off - Kguard BR401 User Manual

Chapter 4: Using the DVR

4.8 Advanced Settings

The Maintain page allows you to set automatic system maintenance, load factory defaults, update the firmware
settings, or reboot and power off the DVR manually.

4.8.1 Maintenance Settings

Manual Reboot and Power Off

To reboot or power off the DVR instantly, do the following:
1
In preview mode, right-click on the mouse to display the Pop-up menu.
2
Select Main Menu
3
Do one of the following:
• Click Shut Down to turn off the DVR.
• Click Reboot to reboot the DVR.
4
A message appears, click OK to confirm the operation.
Note:
When turning off the DVR, wait for the message "Now you can power off!" to appear on the screen, turn off the
power switch (for 16-channel DVR only) and then unplug the power cord from the power outlet.
DVR User's Manual
66
> ADVANCED.