Chapter 4: Using the DVR
4.4.5 Setting Up Mobile Devices
To remotely access the DVR via mobile devices, be sure that the DVR network connection is properly configured before
proceeding with the mobile devices setup.
To configure the mobile devices, do the following:
1
In preview mode, right-click on the mouse to display the Pop-up menu.
2
Select Main Menu
3
Set the User Name and Password which you have set for the DVR.
4
Enter the Mobile Port. The setting range is between 1024 and 65535.
Note:
The user name and password cannot be left empty.
5
After all settings are complete, click Apply.
6
When data saving is complete, click OK.
Note:
For details on supported mobiles, see the "DVR NS series Support Manual" in the enclosed CD.
DVR User's Manual
54
> NETWORK, select the Mobile tab.