Kguard BR401 User Manual page 40

Chapter 4: Using the DVR
Menu item
Video Output
View Setup
View Mode
VOUT Sequence /
SPOT Sequence
Rotate Time
VGA/HDMI
Resolution
Init. DEV
(Initial Device)
Transparency
Volume
4
After all settings are complete, click Apply.
5
When data saving is complete, click OK.
DVR User's Manual
40
Description
Select one of the following:
• LIVE-OUT: To set the video output setting of the main monitor used for live
view display.
• SPOT-OUT: To set the video output setting of the monitor connected to the
SPOT-out connector of the DVR.
Select Enable to enable view setup.
Note:
When View Setup is enabled, Split Windows function is not available (see
Split Mode" on page 33).
Select how you want to split the windows, options are: Single, Quarter, Ninth,
Sixteenth.
Click VOUT Sequence or SPOT Sequence to set the order of how the channels
appear.
Set the interval time (in seconds) when changing screen display in Rotate mode.
See "3.4.4 Rotate View" on page
Select the output resolution.
Select where you want to display the OSD menu when multiple monitors are
connected to the DVR (Video Out, VGA, or Auto).
Hide or display the recording time while recording.
Click Volume to adjust the output volume or mute the audio.
34.
"3.4.2