Table of Contents
Advertisement
Getting started
Battery installation and charging
Install the battery as shown on the next page.
installed the battery, the screen indicates the battery status (see
the table below). If necessary, place the handset in the charger
to charge the battery. For best performance, keep the handset in
the charger when not in use. The battery is fully charged after 11
hours of continuous charging.
operating times.
If the screen is blank, you need to charge the handset without
interruption for at least 30 minutes to give the handset enough
charge to use the telephone for a short time. When the battery is
low, the handset shows Low battery and a flashing .
Battery indicators
The screen is blank or
shows Place in charger
and flashes.
The screen shows
Low battery and
flashes.
The screen shows
EXT XX. (XX represents
the extension number of
the device the handset is
registered to).
See the table on page 65 for battery
Battery status
The battery has no or
very little charge. The
handset cannot be used.
Battery has enough
charge to be used for a
short time.
Battery is charged.
7
Once you have
Action
Charge without
interruption (at least
30 minutes).
Charge without
interruption (at least
30 minutes).
To keep the battery
charged, place it in the or
charger when not in use.
Advertisement
Table of Contents
