Table of Contents
Advertisement
Appendix
California Energy Commission battery charging
testing instructions
This telephone is set up to comply with the energy-conserving standards right out
of box. These instructions are intended for California Energy Commission (CEC)
compliance testing only. When the CEC battery charging testing mode is activated,
all telephone functions, except battery charging, will be disabled.
To activate the CEC battery charging testing mode:
1. Make sure all handsets are plugged with charged batteries and the power
adapter of the Console or Deskset is plugged into the power outlet.
2. On the UP416/UP406, press MENU/SELECT.
3. Press
or
4. Press
or
/SKIP.
5. The screen shows Deregister all devices? Press 'SELECT' to confirm. Press
MENU/SELECT to confirm.
The process takes up to 10 seconds to complete. When the handset successfully
enters the CEC battery charging testing mode, its screen displays Choose
Handset in Registration at base menu. And put handset on cradle to register.
You hear a confirmation tone.
If the handset fails to enter this mode, repeat Step 2 to Step 5 above.
To deactivate the CEC battery charging testing mode:
Unplug the UP416/UP406 power adapter from the power outlet, then plug it
1.
back in. Then the telephone system is powered up as normal.
Register your handsets back to the UP416/UP406. See Adding and
2.
registering a handset pages 12 and 13 for handset registration instructions.
to scroll to Registration and press MENU/SELECT or
to scroll to Deregistration and press MENU/SELECT or
61
/SKIP.
Advertisement
Table of Contents
