Table of Contents
Advertisement
Getting started
Battery installation and charging
Install the battery as shown below.
1. Plug the battery connector securely into the socket inside the
handset battery compartment. Insert the supplied battery with
the label THIS SIDE UP facing up as indicated.
2. Align the cover flat against the battery compartment, then slide
it upwards until it clicks into place.
3. Charge the handset by placing it face forward in the charger.
The charge light is on when charging.
1
NOTES:
•
Use only the supplied rechargeable battery or replacement battery (model
BT166342). To order a replacement battery, visit our website at
businessphones.vtech.com, or call 1 (800) 595-9511. In Canada, dial
1 (800) 267-7377.
•
N'utilisez que le bloc-piles inclus avec cet appareil ou l'équivalent (modèle
BT166342). Pour commander un bloc-piles, composez le 1 (800) 267-7377 ou
visitez notre site Web au businessphones.vtech.com.
•
If you do not use the handset for a long time, disconnect and remove the battery
to prevent possible leakage.
2
8
3
The charge
light turns on.
Advertisement
Table of Contents
