In And Out Button; Intercom; Using An Intercom Button - Vodavi 3552-00 User Manual

50

In and Out Button

An In and Out Button will toggle a station from an in status to an
out status and from an out status to an in status. When in an out
status, the LCD will display "OUT MODE" and all incoming calls will
forward to the Preset Internal Busy Forward destination (Flash 50/
51, Page C, Button #2). If no forwarding destination is programmed
in Flash 50/51, the call will be presented without forwarding.
Attendant stations and SLT stations do not have the In and Out
feature capability.
To change In and Out status:
Press the preprogrammed In and Out Button (feature code
644).

Intercom

Using an Intercom Button

To program a Flexible Button as an Intercom Button:
1. Press SPEED + SPEED.
2. Press the desired flexible button to program.
3. Dial [645] on the dial pad. A confirmation tone will sound. If
an error was made during entry, an error tone will sound.
When an intercom call rings a busy station (w/intercom btn):
» The CALLING station receives a ringback tone instead of a
busy signal. The "called" station hears a muted or reminder
ring and their intercom button LED flashes at the incoming
CO line rate. (This indicates an incoming intercom call.)
In and Out Button