Target; Figure 82: Target Settings - SMC Networks SMCWBR14S-N5 Owner's Manual

For example: If you desire to restrict the internet activities of host with
MAC address 00-11-22-33-44-AA, you should first follow the settings
below:
Click "Add New" button in
1.
Entry" page.
In Mode field, select MAC Address from the drop-down list.
2.
In Host Description field, create a unique description for the host (e.g.
3.
Host_1).
In MAC Address field, enter 00-11-22-33-44-AA.
4.
Click Save to complete the settings.
5.
Then you will go back to the Host Settings page and see the following list.
Select Access Control -> Target from the menu; you can view and set a
T
ARGET
Target list in the screen, as shown in
for Access Control Rules.

Figure 82: Target Settings

◆ Target Description - Here displays the description about the target
and this description is unique.
Information - The target can be IP address, port, or domain name.
◆
Modify - To modify or delete an existing entry.
◆
To add a new entry, follow the steps below.
Click the "Add New" button.
1.
In Mode field, select IP Address or Domain Name.
2.
If you select IP Address, the screen in
a.
In Target Description field, create a unique description for the
●
target (e.g. Target_1).
C
HAPTER
Figure 79 to enter the "Add or Modify a Host
Figure 82. The target list is necessary
– 94 –
| Configuring the Router
4
Access Control
Figure 83 is shown.