Important Safety Instructions - Xantrex XTR 6-110 Operating Manual

Important Safety Instructions

WARNING: High energy and high voltage
Exercise caution when using a power supply. High energy levels can be stored at
the output voltage terminals on a power supply in normal operation. In addition,
potentially lethal voltages exist in the power circuit and on the output and sense
connectors of a power supply with a rated output greater than 40 V. Filter
capacitors store potentially dangerous energy for some time after power is
removed.
WARNING: Fire hazard
Operate the power supply in an environment free of flammable gases or fumes.
To ensure that the power supply's safety features are not compromised, use the
power supply as specified in this Manual and do not substitute parts or make any
unauthorized modifications. If service is necessary, please return the power
supply to the Authorized Service Center. See "Return Material Authorization
Policy" on page WA–3.
WARNING: Limitations on use
The XTR 850 Watt Series Programmable DC Power Supply is not intended for
use in connection with life support systems or other medical equipment or
devices.
CAUTION: For use as a battery charger
When you are using a power supply for battery charging applications, it is
essential to provide an appropriately sized fuse or circuit breaker in series
between the power supply output and the battery.
Installation of a protector (fuse or DC circuit breaker), rated for about 115% of
the maximum current rating of the power supply and designed specifically to
interrupt the DC voltage of the battery, will provide adequate current protection.
Where several power supplies are in parallel, it is best to fuse each power supply
rather than use one fuse at the battery.
Power Supply Safety Markings
M370046-01
Alternating Current
Earth (Ground) Terminal
Protective Conductor
Terminal
On (Supply)
Off (Supply)
Caution (Check the Manual
for additional information.)
vii