Xantrex XTR 6-110 Operating Manual page 10

Safety
Standard Warnings
WARNING: Keep these instructions
This chapter contains important safety and operating instructions. Read and keep
this Operating Manual for future reference.
1. Before installing and using the XTR 850 Watt Series Programmable
2. The XTR is for indoor use only. Do not expose the XTR to moisture.
3. To avoid a risk of fire and electric shock, make sure that the existing
4. Do not operate the XTR if it has received a sharp blow, been dropped,
5. Do not disassemble the XTR. It contains no user-serviceable parts.
6. To reduce the risk of electrical shock, disconnect AC power from the
viii
DC Power Supply, read all instructions and cautionary markings on
the XTR and all appropriate sections of this Manual.
To reduce risk of fire hazard, do not cover or obstruct the ventilation
openings. Be sure to install the XTR in a compartment which allows
air to reach the ventilation inlets on the front and rear of the unit to
prevent overheating. For more information, see "Ventilation" on
page 2–4.
wiring is in good condition and the wire is not undersized. Do not
operate the XTR with damaged or substandard wiring.
or otherwise damaged in any way. If the XTR is damaged, see
"Warranty and Product Information" on page WA–1.
See the "Warranty and Product Information" on page WA–1 for
instructions on obtaining service. Attempting to service the XTR
yourself may result in a risk of electrical shock or fire. Internal
capacitors remain charged after all power is disconnected.
XTR before attempting any maintenance or cleaning or working on
any circuits connected to the XTR. Turning off controls will not
reduce this risk.
M370046-01