Local Operation
Table 3-1 Select and Set from the Front Panel
9 Positions on the Mode
Control Knob
CAP (Current Analog
Programming)
VAP (Voltage Analog
Programming)
PGM (Remote Programming) Select the remote interface to be
3-4
Turning the Rotary Knob lets you...
Select the programming source and
select the range.
Select the programming source and
select the range.
used for control.
Pressing the Enter Button lets
you...
Set the value selected and
cycle to the next setting.
Set the value selected and
cycle to the next setting.
Select interface and cycle to
the next setting.
M370046-01