Warranty; Regulatory Compliance; Environmental; Power Requirement - TV One S2-101AA Operation Manual

Analog input/output impedance: 75 Ohm
Signal Level:
Supported standards:
Reclocking and Equalization:
Maximum Data Rate:
Maximum Jitter

19.8 Warranty

Limited warranty: 2 years parts and labor

19.9 Regulatory Compliance

Main unit conforms to FCC, CE, RoHS

19.10 Environmental

Operating Temperature 0° to +45° C (+32° to +113° F)
Operating Humidity 10% to 85%, Non-condensing
Storage Temperature -10° to +70° C (+14° to +158° F)
Storage Humidity 10% to 85%, Non-condensing

19.11 Power Requirement

Actual current consumption varies between units.
Internal over-voltage & over-current protection.
External power supply specification: 12v DC regulated 1Amp PSU (12V DC @ 4A
STD-104 for S2-101AA), with a 2.5mm locking center-pin positive DC power
connector. A non-locking 2.5mm DC power connector will also fit.

19.12 Control Methods

The unit can be controlled locally via the front panel buttons, or in the case of an S2-
106AD, a multi-directional switch and Liquid Crystal Display. It can also be controlled
remotely via the RS-232 interface using a D9 female connector, or using an Infra-red
remote using the IRC-4 or IRC-5 remote unit.

19.13 Accessories Included

A breakout OPTION cable is shipped with each S2 switcher.

19.14 Mechanical

Size (H x W x D): 1.6" x 8.6" x 5.9" (41.5 x 218 x 150mm)
Weight (Net): 2.6 lbs (1.2 kg) (different unit types may vary)

19.15 Optional Accessories

RM-220: single/dual rack-mount Kit
800 mV p-p approx.
SMPTE 292M and 259M
Automatic
1.485 Gbps
0.2UI
60