Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for TV One 1T-VS-668
Summary of Contents for TV One 1T-VS-668
-
Page 1: Instruction Manual
Instruction Manual 1T-VS-668 Universal Presentation Switcher/Scaler... -
Page 2: Table Of Contents
Table of Contents Introduction Specifications Checking Package Contents Connecting The Hardware Operating The Unit Troubleshooting Limited Warranty Regulatory Compliance Contacts... -
Page 3: Introduction
All other trademarks are the property of their respective holders. Features The 1T-VS-668 has many features that enable it to perform in a superior manner. Among those features you will find: 3D Motion Adaptive De-Interlacing ... -
Page 4: Specifications
SPECIFICATIONS: Video Inputs HDMI (DVI Compatible) 3x via HDMI Connector Analog RGBHV 3x via HD-15 Connector Analog Component (YPbPr/YUV) 1x via 3x RCA Connectors Composite Video 1x NTSC or PAL via RCA Connector Audio Inputs Analog Audio (Stereo) 2x via RCA (R/L), 6x via 3.5mm mini Video Output HDMI Video (v1.2) 2x via HDMI Connector... -
Page 5: Checking Package Contents
Supported Input and Output Formats and Resolutions The 1T-VS-668 accepts HDMI (DVI compatible), HD15 (RGBHV), Analog Component, and Composite inputs via separate connectors and can output all resolutions over the included HDMI (DVI compatible) and HD15 outputs. The resolutions and formats... -
Page 6: Connecting The Hardware
CONNECTING THE HARDWARE Referring to the drawings below, connect the proper cables and then connect the AC power adaptor. Rear Panel Connectors: The rear panel has the connectors required to interface the 1T- VS-668 to the External Inputs, Outputs and Power Supply. The numbers above and below the drawing relate to the connector directly above or below the number. - Page 7 1T-VS- 668. Note: To realize maximum quality and performance, use only the highest quality cables with the 1T-VS-668. Low quality cables will cause degradation of the signal quality and limit the distance between both the source and...
-
Page 8: Operating The Unit
OPERATING THE UNIT The 1T-VS-668 can be operated from either the front panel controls or via the included Infrared Remote Control. Since Infrared is the control method used most often by the majority of users, please take the time to familiarize yourself with the location and function of the various control buttons on the Controller. - Page 9 Remote Control Operation POWER: Press this button to switch the device on or to set it to standby mode. _____ 1 2 HDMI1/2/3, PC1/2/3, CV and COMP: Direct source selection keys. Press one of these keys to switch to the required source. MENU: Press this button to enter the OSD 2 ____ EXIT: Press this button to exit the menu or...
- Page 10 Using the On Screen Display Menus Regardless of whether you operate the 1T-VS-668 from the front panel or using the Remote Controller, you will need to become familiar with the OSD (On Screen Display) menu structure if you wish to take full advantage of the capability of the product.
- Page 11 MAIN MENU SUB MENU 3RD MENU 4TH MENU DISPLAY (cont.) SIZE (cont.) LETTER BOX UNDER 2 UNDER 1 MODE INFO INFO* INPUT HDCP (HDMI mode only) AUTO SETUP (PC mode only) H_POSITION V_POSITION PHASE CLOCK XGA* WXGA/XGA WXGA RESET CONTRAST COLOR 0~60 [30] BRIGHTNESS...
- Page 12 Items in BOLD with an asterisk (*) are the factory default settings. Items in brackets [ ] are the default values for those settings. RS-232 Protocol The connection between 1T-VS-658 and controller with RS-232 modem cable. 1T-VS-668 Remote Control Assignment Assignment...
- Page 13 COMMAND DESCRIPTION S POWER 0/1 0=OFF 1=ON R POWER Reports the numeric equivalent for POWER setting (as above) 1=HDMI 1 5=VIDEO 2=HDMI 2 6=PC 1 S SOURCE 1~8 3=HDMI 3 7=PC 2 4=YPbPr 8=PC 3 R SOURCE Reports the numerical equivalent for SOURCE setting (as above) 0=640×480 11=1600×1200 1=800×600...
-
Page 14: Telnet Control
Line feed (LF) command. Commands are case-insensitive. Telnet Control Before attempting to use the Telnet control, ensure that both the 1T-VS-668 (via the LAN port) and the PC/Laptop or control system being used are connected to the same active network. - Page 15 On a PC/Laptop that is connected to same active network as the Scaler, open a web browser and input the unit’s IP address on the web address entry bar. The browser will bring up the 1T-VS-668’s Web GUI control page (see below for reference). All functions of the unit are controllable from this single screen.
-
Page 16: Troubleshooting
TROUBLESHOOTING If the 1T-VS-668 Scaler does not appear to be functioning, be certain that the source and all other devices connected to the unit are functioning correctly by connecting each device currently connected to the 1T-VS-668’s outputs directly to the source using a short length of cable. -
Page 17: Limited Warranty
LIMITED WARRANTY tvONE warrants the original purchaser that the equipment it manufactures or sells will be free from defects in materials and workmanship for a fixed term from the date of purchase. The warranty term for specific product lines is defined below. 1. -
Page 18: Regulatory Compliance
REGULATORY COMPLIANCE The 1T-VS-668 Universal Presentation Switcher/Scaler has been tested for compliance with the appropriate FCC and CE rules and regulations. The power adaptor/supply has been tested for compliance with appropriate UL, CUL, CE, PSE, GS Rules, regulations and/or guidelines. This product and power adapter is RoHS compliant.
Need help?
Do you have a question about the 1T-VS-668 and is the answer not in the manual?
Questions and answers