Remote Control; Locking Out The Ir Remote Control - TV One S2-101AA Operation Manual

S2 switcher series

Table of Contents

11.6 Remote control

Your unit comes fitted with infra-red control capability, however infra-red controllers

are not shipped with the S2 switcher range as standard.

Please refer to the 'Infra-red remote control' section for more information.

When powered up, your S2 unit will be responsive to a remote control handset by

default. The responsiveness of the S2 unit can be disabled simply by pressing

source selection button 1 simultaneously with the standby button. When both buttons

are released, the panel buttons will flash twice and the unit will no longer respond to

an infra-red handset.

To re-enable responsiveness, press both buttons again, the buttons will then flash

once and the unit will again respond to handset commands.

Table of Contents

Do you have a question about the S2-101AA and is the answer not in the manual?

S2-105dvia S2-105cva S2-105cv S2-105pca S2-105pc S2-105yca ... Show all