Fuel/ Oil - Pro-Line Boats 27 Walkaround Owner's Manual

Air conditioner (optional)
The optional air conditioner uses raw water for cooling. The seacock is located in the bilge. A
strainer is located between the seacock and the cooling (raw water) pump. When the boat is put in
the water the raw water pump must be primed by removing the hose from the pump outlet until the
pump is full of water. Do not operate the unit if cooling water is not flowing or the pump will be
damaged. If the unit fails to cool inspect the intake and strainer for blockage. Make sure that the
seacock is open when in use and closed when not in use. If the boat is removed from the water and
the seacock is not closed the raw water pump will lose its prime.
Fuel / Oil System
The fuel tank on your Pro-Line is made of aluminum with internal baffling to minimize sloshing.
The tank is vented at the fill, inspect the vent for obstructions regularly. 'Deck plate' access ports
are placed over the hose connections and the sending unit. Inspect the hose connections on a
regular basis. If you notice fuel odor or see fuel in the bilge there may be a leak somewhere in the
fuel system. Correct any fuel leaks before operating vessel.