User Operations; Recording (R) - GE Security VSR-4 User Manual

User Operations

The following user operations are implemented through the VSR Keyboard utility.
Figure 22. VSR Keyboard and Keyboard shortcuts

Recording (R)

To begin recording, click the record button or press the R key on your keyboard. RECORD will be indicated for
three seconds, near the upper left hand corner of the output monitor. The unit always starts recording at the end
of the previously recorded data.
Recording will continue until:
• The Stop button is clicked.
• The disk is full (In No Overwrite and Overwrite Once modes). See
Mode on page 56, for details regarding Disk Overwrite modes.
Normal Recording
The normal record speed is indicated on the output monitor, and can be altered using the Up/Down Record
Speed buttons, or page up/page down keys on your keyboard.
For information about altering the normal record speed from the menu system, see
Settings / Record Speed
The normal record speed can be altered while the unit is recording. The unit will continue recording while the
menu system is active.
on page 51 of the Operator Programming section of this manual.
Advanced Menu / Disk Overwrite
Main Menu / Record
29