Specifying Search Parameters - GE Security VSR-4 User Manual

Use this to specify:
• The Start and Stop date of the search.
• The Start and Stop time of the search.
• The camera selection is not editable.
• To search for recorded alarms.
Searching for All Recorded Events
Using the Arrow buttons to navigate, highlight [START SEARCH], then press the Enter button. The Search
Results window will appear. For information about selecting a recorded event, see Selecting from the Search
Results, in this section.

Specifying Search Parameters

Selecting a Start and Stop Date
1. Using the Arrow buttons to navigate, highlight the DATE parameter, then press the Enter button. The
unit will enter Edit mode.
2. Use the Arrow buttons to change the start and stop date values. Use the Arrow buttons to navigate
among the different parameters.
3. To activate the start or stop date parameter, use the Arrow buttons to place an [X] in the check box.
4. Press the Enter button at any time to exit Edit mode.
Selecting a Start and Stop Time
1. Using the Arrow buttons to navigate, highlight the TIME parameter, then press the Enter button. The
unit will enter Edit mode.
2. Use the Arrow buttons to change the start and stop time values. Use the Arrow buttons to navigate
among the different parameters.
3. To activate the start or stop time parameter, use the Arrow buttons to place an [X] in the check box.
4. Press the Enter button at any time to exit Edit mode.
Searching for Recorded Alarms
1. Using the Arrow buttons to navigate, highlight the ALARM parameter, then press the Enter button.
The unit will enter Edit mode.
2. Use the Arrow buttons to activate the alarms search, by placing an [X] in the check box.
3. Press the Enter button at any time to exit Edit mode.
Starting the Search
Using the Arrow buttons to navigate, highlight the [START SEARCH] parameter, then press the Enter
button. The Search Results menu will appear.
35