Figure 12. Configuration page
On this page you can remotely modify the following settings of the VSR-4:
•
Network settings including the IP Address, Subnet Mask, and Gateway Address.
•
Streaming settings including setting the unit as a sender or receiver and streaming mode.
•
What display options to view.
•
Password settings.
•
Email settings.
Network Settings
This page provides an alternate method of changing the VSR-4's IP addresses. You can also enable DHCP
(Dynamic Host Configuration Protocol) and assign your unit a hostname. DHCP is an Internet protocol for
automating the configuration of devices that use TCP/IP. DHCP can be used to automatically assign IP
addresses.
21
Need help?
Do you have a question about the VSR-4 and is the answer not in the manual?