The Menu System; How To Use The Menu System - GE Security VSR-4 User Manual

The Menu System

This section provides a brief overview of the menu system, for complete information about the menu system
and basic setup of the VSR-4, see

How to use the Menu system

Throughout this manual, there are headings like these.
Table 9.
Heading
/
Main menu Record Timer
/
Main menu Record Settings
Pull-down Menus
Pull-down menus are the top-level menus. Make a selection in a pull-down menu to enter the appropriate sub-
menu (typically a pop-up menu). Changes to the unit's parameters are usually made in pop-up menus.
To exit a pull-down menu, click the Menu button or press the M key.
Pop-up Menus
Pop-up menus usually have a parameter (or several parameters), from which the user can make a selection or
change the value.
Use the Arrow buttons to select a new parameter and to change the value of that parameter.
To Save changes and Exit the menu: Select [OK], the click the Enter button. To Exit the menu without
making changes: click the Menu button or select [CANCEL], then click the Enter button.
Entering the Main menu
Enter the Main menu by clicking the Menu button or press the M key. The Main menu will appear on the
output monitor.
The Arrow Buttons
When in the Main Menu the Arrow buttons are used to navigate and modify field values. The up and down
arrow buttons will increase or decrease the value of a selected field. The left and right arrow buttons select the
previous or next field.
Note: Using the keyboard shortcuts is much easier and faster than clicking on the screen with your mouse.
Main Menu Setup
→
Normal Record Speed
on page 39.
Meaning
From the main menu, select Record Timer, then click the Enter
button. A pop-up or pull down menu will appear.
From the main menu, select Record Settings, then click the Enter
button. This opens another menu. In this menu, select Normal
Record Speed, then click the Enter button. A pop-up or pull down
menu will appear.
37