GE Security VSR-4 User Manual page 60

54 VSR-4
User Manual
Main Menu / Display Settings / Record Capacity
Select ON, to display the amount of time remaining before the hard disk runs out of record space. The data is
displayed near the upper left hand corner of the output monitor. The unit displays the Record Capacity with
two measures of time, and switches automatically depending on the amount of time remaining:
• Days and Hours
• Hours and Minutes
• Minutes and Seconds
Use the Arrow buttons to select ON or OFF.
click the Enter button to confirm the selection and exit the menu, or click the Menu button to exit the menu
without making changes.
Main Menu / Display Settings / Last Alarm
To display the time and date of the last alarm, near the upper right hand corner of the output monitor, select On.
The unit will display NONE if there is no previous record of an alarm.
Use the Arrow buttons to select On or Off.
click the Enter button to confirm the selection and exit the menu, or click the Menu button to exit the menu
without making changes.
Main Menu / Display Settings / Record Playback Speed
To display the Record or Playback Speed, near the lower right hand corner of the output monitor, select On.
The unit will display NONE if there is no previous record of an alarm.
Use the Arrow buttons to select On or Off.
click the Enter button to confirm the selection and exit the menu, or click the Menu button to exit the menu
without making changes.
Main Menu / Display Settings / Playback Time / Date
To display the time and date the recording was made (during playback) select On. The data is displayed near
the upper right hand corner of the screen.
Use the Arrow buttons to select On or Off.
click the Enter button to confirm the selection and exit the menu, or click the Menu button to exit the menu
without making changes.
Main Menu / Display Settings / Camera Title
To display the camera title near the upper left hand corner of the output monitor, select On. The unit will
display NONE if there is no previous record of an alarm.
Use the Arrow buttons to select On or Off.