Network Settings - GE Security TruVision DVR 10 User Manual

Condition
Network failure
NTSC/PAL mismatch
Use the Notification screen (displayed in Figure 26 below) to define how you want to
be notified of these exceptions. To display the Notification screen, click Notification
Setup on the Alarms screen.
Figure 26: Notification screen
Use the Exception list box to select an exception, and then check one or more of the
following notification methods:
Buzzer. An audible alarm sounds.
Upload to Client. This feature is currently not supported.
Trigger Alarm Out. Triggers an alarm output.
Alarm Out. Triggers an alarm output. Up to four alarm outputs can be enabled.
When finished, click Confirm to save your settings and return to the Alarms screen.

Network settings

Accessing the TVR 10 through a network requires that you define certain network
settings. Use the Network screen to define the network settings of the TVR 10. The
following options can be configured:
• IP address and settings
TruVision DVR 10 User Manual
When alarm occurs
Network connection was lost.
The input and output have a different video format.
Chapter 5: Advanced setup
71