Commands Of Cli - SignaMax 065-7841 User Manual

Signamax ™ ™ ™ ™ 065-7841 24-Port 10/100/1000BaseT/TX Managed Switch

4-2. Commands of CLI

To see the commands of the mode, please input "?" after the prompt, then all
commands will be listed in the screen. All commands can be divided into two
categories, including global commands and local commands. Global commands can
be used wherever the mode you are. They are "exit", "end", "help", "history", "logout",
"save start", "save user", "restore default" and "restore user". For more details,
please refer to Section 4-2-1.
Command instructions reside in the corresponding modes are local
commands. The same command with the same command name may occur but
perform totally different function in different modes. For example, "show" in IP mode
performs displaying the IP information; however, it performs displaying the system
information in system mode. For more details, please refer to Section 4-2-2.
Managed Switch - - - - 065 Managed Switch Managed Switch Managed Switch 065- - - - 7841 065 065
Login: Login: admin admin
Login: Login: admin admin
Password: Password: Password: Password: ***** ***** ***** *****
065- - - - 7841# help 065 7841# help
065 065 7841# help 7841# help
Commands available: Commands available: Commands available: Commands available:
-------------<< Local commands >> ------------- << Local commands >>-------------
------------- ------------- << Local commands >> << Local commands >>
802.1X 802.1X 802.1X 802.1X
7841 7841 7841
-------------
------------- -------------
Enter into 802.1X mode Enter into 802.1X mode Enter into 802.1X mode Enter into 802.1X mode
Fig. 4-3
215
Publication date: March 2010
Revision 1.0