Table of Contents
Advertisement
Signamax
™ ™ ™ ™
065-7841 24-Port 10/100/1000BaseT/TX Managed Switch
3-1-5. Loop Detection
The loop detection is used to detect the presence of traffic. When switch
receives packet's(looping detection frame) MAC address the same as oneself from
port, show Loop detection happens. The port will be locked when it received the
looping detection frames. If you want to resume the locked port, please find out the
looping path and take off the looping path, then select the resume the locked port
and click on "Resume" to turn on the locked ports.
Function name:
Loop Detection
Function description:
Display whether switch open Loop detection.
Parameter description:
Port No:
Display the port number. The number is 1 – 24.
Detection Port - Enable:
When Port No is chosen, and enable port' s Loop detection, the port can
detect a loop happening. When Port-No is chosen, enable port' s Loop
detection, and if the port detects aloop happening, the port will be
Locked. If a loop did not happen, the port remains Unlocked.
Locked Port - Resume:
When Port No is chosen, enable port' s Loop detection, and if the port
detects a loop happening, the port will be Locked. When choosing
Resume, the locked port will be opened and turned into unlocked. If you
do not choose Resume, the port remains locked.
Fig. 3-8
49
Publication date: March 2010
Revision 1.0
Advertisement
Table of Contents
