Table of Contents
Advertisement
exported file can be edited on your computer, like adding or deleting the content, and
copying the settings to other devices by importing the excel file to it.
Protocol
To connect the network cameras which are not configured with the standard protocols, you
can configure the customized protocols for them. The system provides 16 customized
protocols.
Camera Activation Password Settings
Change the default password for activating and adding network cameras.
Batch Configuration
The device can enable SVC function or automatically synchronize time of the selected
network cameras.
Quick Image Output Configuration
After the network camera that supports this function is linked to the NVR,enabling this
function will increase the image outputting speed of the camera.
Note
This function is only available for NVRs that support PoE function.
6.3.2 Display Settings
Configure the OSD (On-Screen Display), image settings, exposure settings, day/night switch
settings, etc.
Steps
1. Go to Configuration → Camera → Display.
2. Set Camera.
3. Configure parameters as your desire.
OSD Settings
Configure the OSD (On-screen Display) settings for the camera, including date/time, camera
name, etc.
Image Settings
Customize the image parameters including the brightness, contrast, and saturation for the
live view and recording effect.
Exposure
Set the camera exposure time (1/10000 to 1 sec). A larger exposure value results in a brighter
image.
Day/Night Switch
The camera can be set to day, night, auto or scheduled switch mode according to the
Network Video Recorder User Manual
53
Advertisement
Table of Contents
