Table of Contents
Advertisement
Signamax Connectivity Systems __________________________________________
Tag-based QoS:
Tag-based QoS assigns packet priority according to the tags on the packets.
To configure Tag-based QoS:
Select "Tagged" in the "Mode" column for those ports that are going to perform
1.
tag-based QoS. Click the "Apply" button.
Click the "Tag priority" button. The "Tag Priority Setting" page shows up.
2.
3.
Select the port that you are going to configure from the drop menu.
4.
Set the priorities as high or low for each Priority Tag type.
5.
Click the "Apply" button again to execute your configuration.
20
065-7942
Advertisement
Table of Contents
