Replacing The Fuel Filter; Checking Tire Pressures; Checking And Filling Coolant - Husqvarna BZ 27 Operator's Manual

Husqvarna rider operator's manual
Table of Contents

Advertisement

Replacing the Fuel Filter

The fuel filter is located with the priming
pump.
Replace the fuel filter every 800 hours (once
per season) or more regularly if it becomes
clogged.
Replace the filter as follow:
Unscrew fuel filter from pump and replace.
Every 50 hours check for water in the fuel
filter. Empty if necessary. Refer to the engine
manual.

Checking Tire Pressures

All four tires should have a pressure of 15 psi
/ 103 kPa / 1 bar.
Check and Filling Coolant System
WARNING!
ALWAYS make sure the engine
is stopped and cool before
removing radiator pressure
cap. To prevent scalding by hot
fluid, NEVER remove the
radiator cap while engine is
hot.
NOTE: Failure to follow the recommended
procedure for filling the cooling system will
cause engine overheating and possible
engine failure.
ALWAYS check coolant level at the overflow
reservoir. The correct level of coolant in the
over flow tank does NOT assure the radiator
is full.
MAINTENANCE
Fuel filter and fuel pump
Tire pressures
Radiator
BAM-18
8011-564
BAM-19
43
English-

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bz 34

Table of Contents