Husqvarna BZ 27 Operator's Manual page 61

6. Front Wheel Bearings
Lubricate with a grease gun, one zerk for each
set of wheel bearings, until the grease is forced
out.
Use only good quality molybdenum
disulphide grease.
Grease from well-known brand names
(petrochemical companies, etc.) usually
maintains a good quality.
7. Belt Adjuster, Mower Deck
Remove the foot plate (two screws) and
lubricate with a grease gun, one zerk, until
grease is forced out.
Use only good quality molybdenum
disulphide grease.
Grease from well-known brand names
(petrochemical companies, etc.) usually
maintains a good quality.
IMPORTANT INFORMATION
Be careful and remove excess lubricant
so that it does not come into contact with
belts or belt pulley drive surfaces.
8. Mower Deck Height Adjuster
Lubricate using a grease gun, one zerk,
until the grease squeezes out.
Use only good quality molybdenum
disulphide grease.
Grease from well-known brand names
(petrochemical companies, etc.) usually
maintains a good quality.
LUBRICATION
Lubricating the front wheels
Deck belt pulley
Lubricating the cutting height adjuster
8011-573
8011-461
8011-574
59
English-