Husqvarna BZ 27 Operator's Manual page 52

To adjust anti-scalp rollers
Anti-scalp rollers are properly adjusted when
they are just slightly off of the ground when
the deck is at the desired cutting height in the
operating position. Anti-scalp rollers then
keep the deck in the proper position to help
prevent scalping in most terrain conditions.
IMPORTANT INFORMATION
Adjust Anti-scalp rollers with the mower
on a flat level surface.
Tunnel Ram Deck -
The anti-scalp rollers can be set in three
positions:
• Upper position 1.5" to 3"/38 to 76 mm
grass.
• Middle position 3" to 4.5"/76 to 114 mm
grass.
• Lower position 4.5" to 6"/114 to 152 mm
grass.
Combi Deck -
• Upper position 1.5" to 3.0" (38 to 76mm)
grass.
• Lower position 3.0" to 4.5" (76 to
114mm) grass.
The rollers should be approximately 1/4"/6.5
mm from ground. Do not adjust the rollers to
support the deck.
IMPORTANT INFORMATION
The anti-scalp rollers must not be used
for gauge wheels or the roller and deck
may be damaged.
50
English-
MAINTENANCE
Anti-scalp roller
Anti-scalp roller - Combi Decks
CZ-9
CZ-9