Checking The Engine's Cooling Air Intake; Clutch Service; Checking And Adjusting The Throttle Cable - Husqvarna BZ 27 Operator's Manual

Checking the Engine's Cooling Air Intake

Check that the engine's cooling air intake is
free from leaves, grass, and dirt.
If the cooling air intake is clogged, engine
cooling deteriorates, which can lead to
engine damage.
Checking and Adjusting the
Throttle Cable
Check that the engine responds to throttle
increases and that a good engine speed is
attained at full throttle.
If doubts arise, contact the service workshop.
If adjustments are necessary, they can be
made as follows for the lower cable:
1. Loosen the clamping screw for the
cable's outer casing and move the
throttle to the full throttle position.
2. Check that the throttle cable is mounted
in the correct hole in the lower lever, see
illustration.
3. Push the throttle cable's outer casing as
far to the left as possible and tighten the
clamping screw.
Clutch Service and Maintenance
The clutch has an adjustable air gap that
should not require adjustment for the life of
the machine. Refer to the manufacture's
specifications sheet included with the mower.
40
English-
MAINTENANCE
Check and clean the cooling air intake
Adjusting the throttle cable
BAM-13
BAM-14