Replacing The Fuel Filter; Replacing The Air Filter - Husqvarna Rider 15V2 Operator's Manual

Replacing the fuel filter

Replace the pipe fitted fuel filter every 100 running
hours (once per season) or more frequently if it is
clogged.
Replace the filter as follows:
1. Fold open the engine cover.
2. Move the hose clips away from the filter. Use a
pair of flat pliers.
3. Pull off the filter from the hose ends.
4. Press in the new filter on the hose ends. If
necessary soap solution can be applied on the
filter ends to simplify fitting.
5. Push the hose clips back on the filter.

Replacing the air filter

VARNING!
Exhaust system is hot. Allow to
cool down. Risk of finger injuries.
If the engine seems to lack power or runs
irregularly, the reason may be a clogged air filter.
It is therefore important to replace the air filter at
regular intervals (see "Maintenance schedule" for
correct service interval).
1. Remove the air cleaner case from the air
cleaner body by pushing down the latches with
fingers.
IMPORTANT INFORMATION
Never run the engine with the air cleaner
removed.
Filters should not be oiled. They should
be assembled dry.
2. Lift out the paper element and the foam
element from the air cleaner case.
3. Clean the foam element by washing it in
detergent and water.
4. Dry the foam element thorougly.
28
– English
MAINTENANCE