Relays; Tracking; Accessories - Husqvarna BZ 27 Operator's Manual

Relays

The relays and glow plug timer are located in
a holder to the right side of the seat.

Tracking

The tracking knob is located in front of the left
control lever. Rotating this knob allows fine
tuning adjustments so that the machine
tracks straight with the drive levers in the full
forward position. Rotate the knob colockwise
(as viewed from the operating position) to
increase the speed or counterclockwise to
devrease the speed on the left control lever.
Example: If control levers are full forward and
the unit turns to the right, turn the tracking
knob counterclockwise to decrease the speed
on the left control lever.

Accessories

For mulching, there is a Mulch Kit attachment
available. This is mounted underneath the
mower deck and comprised of baffles and
mulch blades.
ROPS (Roll Over Protection System) is also
available for the unit.
A baffle kit is available for the TRD61B - 61"
and TRD72B - 72" cutting decks.
24
English-
CONTROLS
1
Relays
Tracking knob
Mulch kit attachment
2
3
RUN
RELAY
1. Glow plug timer
2. Glow plug relay
3. Run relay
4. Start relay
5. Seat relay
START
RELAY
BAM-12A
8011-442
8011-566