Replacing The Fuel Filter; Checking Tire Pressures; Checking The Parking Brake - Husqvarna Z4824 Operator's Manual

MAINTENANCE
Replacing the Fuel Filter
Replace the line-mounted fuel filter every
100 hours (once per season) or more
regularly if it is clogged.
Replace the filter as follows:
1. Move the hose clamps away from the
filter. Use flat-nosed pliers.
2. Pull the filter loose from the hose ends.
3. Push the new filter into the hose ends.
Position the filter with the "FLOW" arrow
pointing up toward the carburator. If
necessary, a soap solution can be
applied to the filter ends to ease
mounting.
4. Move the hose clamps back toward the
filter.
Fuel filter
8009405
Checking Tire Pressures
All four tires shouldhave a pressure of
15 psi / 103 kPa/1 bar.
Checking the Parking Brake
Visually check that no damage is found on
the lever, linages, or switch belonging to the
parking brake. Perform a stand still test and
check that there is a braking action.
To adjust the parking brake, contact the
Husqvarna service workshop.
Tire pressures
8011_64
I MPORTANT INFORMATION I
The parking brake is a mechanical latch
brake and must not be applied when the
mower is moving.
WARNING!
Faulty adjustment can cause
an accident.
I
English_l