Checking The Engine's Cooling Air Intake; Checking And Adjusting The Throttle Cable; Checking And Adjusting The Choke Cable - Husqvarna EZ4624 Operator's Manual

Checking the Engine's
Cooling Air Intake
Check that the engine's cooling air intake is free from
leaves, grass, and dirt.
If the cooling air intake is clogged, engine cooling
deteriorates, which can lead to engine damage.
The cooling air intakes rotates when the engine is
running. Mind your fingers.
Checking and Adjusting
the Throttle Cable
Check that the engine responds to throttle increases
and that a good engine speed is attained at full throttle.
If doubts arise, contact the service workshop.
If adjustments are necessary, they can be made as
follows for the lower cable:
1. Loosen the clamping screw for the cable's outer
casing and move the throttle to the full throttle
position.
2. Check that the throttle cable is mounted in the
correct hole in the lower lever, see illustration.
3. Push the throttle cable's outer casing as far to the
right as possible and tighten the clamping screw.
Checking and Adjusting the Choke
Cable
If the engine produces black smoke or is difficult to
start, this can be because the choke cable is
incorrectly adjusted (upper cable).
If doubts arise, contact the service workshop.
If adjustments are necessary, they can be made as
follows:
1. Loosen the clamping screw for the cable's outer
casing and push the choke control fully in.
2. Check that the choke cable is mounted in the upper
lever, see illustration. Push the choke cable's outer
casing as far to the left as possible and tighten the
clamping screw.
MAINTENANCE
Check and clean the cooling air intake
2. Throttle cable
Adjusting the throttle cable
1. Choke cable
Adjusting the choke cable
1
2
1
2
English
8011-719
8011-720
8011-720
41
-