Setting Passcode Polling - Muratec MFX-2590 Administrator's Manual

7
Select [ON] and press [Enter].
Press [OFF] to disable closed reception.

Setting Passcode Polling

If you set passcode polling, you can only perform polling with Muratec machines that also
have the same passcode set. If the passcode does not match, polling cannot be performed.
Note
To set the passcode, refer to
1
Press <Setting>.
2
Press the [Management] tab.
3
If an administrator password is set,
If an administrator password is not set, proceed to step 5.
4
Enter the administrator password, and press [Enter].
5
Press [Security Communication].
"Setting the Passcode".
press [Admin Password].
(See page 2-12.)
Closed Communication
1
2
2-11