Hardware Installation; Installing Camera With Screws - Planet ICA-5250 User Manual

Ethernet

2.2 Hardware Installation

2.2.1 Installing camera with screws

1. Open the screw kit and use three screws to lock the base of camera on the ceiling or
the wall.
2. Put back the cover by turning it tightly so as to prevent water from getting into it.
Name Cable Color
GND Yellow/Green
DI
Blue
DO
Orange
The LAN socket is a RJ-45 connector for connections to 10Base-T
Ethernet or 100Base-TX Fast Ethernet cabling. This Ethernet port
built N-Way protocol can detect or negotiate the transmission speed
of the network automatically. Please use Category 5 cable to connect
the Network Camera to a 100Mbps Fast Ethernet network switch or
hub.
13
Full HD Ultra-mini Vandal Dome
Function
GND
Digital signal input
Digital signal output
ICA-5250