Introducing The Switch - HP ProCurve Series 2600 Installation And Getting Started Manual

Introducing the Switch

The ProCurve Series 2600 Switches are multiport switches that can be used
to build high-performance switched workgroup networks. These switches are
store-and-forward devices that offer low latency for high-speed networking.
The 2600-PWR Switches also support Redundant Power Supply and Power
over Ethernet (PoE) technologies.
1 3 5 7
hp procurve
switch 2 4 6 8
2650-PWR
1
J8165A
PoE
Status
RPS Act
LED
EPS FDx
Mode
Power
Fan Spd
Test
PoE
Fault
2
Reset Clear Spd mode: off = 10 Mbps, flash = 100 Mbps,
hp procurve
switch
2626-PWR
J8164A
PoE
Status
RPS Act
LED
EPS FDx
Power Mode
Fan Spd
Test
PoE
Fault
Reset Clear
Spd mode: off = 10 Mbps, flash = 100 Mbps,
ProCurve *
Spd mode: off = 10 Mbps, flash = 100 Mbps,
Switch 2600-PWR
J8762A
PoE
Status
RPS Act
LED
EPS FDx
Mode
Power
Fan *
Spd
Test PoE
Fault Console
Reset Clear
Throughout this manual, these switches will be referred to as the Series 2600
Switches and the Series 2600-PWR Switches.
9 11 13 15 17 19 21 23
10 12 14 16 18 20 22 24
11 13
12 14
on = 1000 Mbps PoE-Ready 10/100Base-TX Ports (1 - 48)
on = 1000 Mbps
ProCurve Switch 2600-8-PWR with Gigabit Uplink (J8762A)
on = 1000 Mbps
ProCurve Switch 2650 (J4899B)
ProCurve Switch 2626 (J4900B)
ProCurve Switch 2650-PWR (J8165A)
25 27 29 31 33 35 37
Link|Mode
26 28 30 32 34 36 38
23 25 35 37
24 26 36 38
(all 10/100Base-TX ports are HP Auto-MDIX, Gig-T ports are IEEE Auto MDI/MDI-X)
ProCurve Switch 2626-PWR (J8164A)
5 9 11
1 3 7 13
Link|Mode
2 4 6 8 10 12 14
1 11 13
2 12 14
PoE-Ready 10/100Base-TX Ports (1 - 24) (all 10/100Base-TX ports are HP Auto-MDIX, Gig-T ports are IEEE Auto MDI/MDI-X)
PoE-Integrated 10/100-TX Ports (1 - 8)
— (Ports are HP Auto-MDIX)
1 2 3 4 Link 5
Link Mode Mode
39 41 43 45 47
40 42 44 46 48
47
49 M 50
48
! Use only one (T or M) for each Gigabit port
15 17 19 21 23
16 18 20 22 24
23
25 M 26
24
Use only one (T or M) for each Gigabit port
!
Dual-Personality Port:
10/100/1000-T (T) or Mini-GBIC (M)
(Port 9T is IEEE Auto MDI/MDIX)
6 7 8 Link 9T 9M
Mode
Link
Mode
Use only one (T or M) for Port 9
!
1
Gig-T
Ports
M
Mini-
GBIC
Ports
Gig-T
Ports
M
Mini-
GBIC
Ports
1-1