Connectors; Cable Length; Safety; Lasers - HP ProCurve Series 2600 Installation And Getting Started Manual

Connectors

The 10/100/1000 Mbps RJ-45 twisted-pair ports are compatible with the
following standards:
• IEEE 802.3ab 1000Base-T
• IEEE 802.3u 100Base-TX
• IEEE 802.3 10Base-T
The 1000 Mbps LC fiber-optic ports on the Gigabit-SX and Gigabit-LX mini-
GBIC transceivers are compatible with the IEEE 802.3z Gigabit-SX and
Gigabit-LX standards.
EPS connector: A 2x7 Molex Micro-Fit connector should be used for EPS
connection.
RPS connector: A 2x7 connector is provided for external RPS connection
on the power supply module.

Cable Length

EPS cables are 2.0 meters (6.56 feet) in length
RPS cables are 1.25 meters (4.10 feet) in length

Safety

Complies with:
EN60950 / IEC 6095
CSA 22.2 No. 950
UL 60950

Lasers

The Gigabit-SX LC mini-GBIC, and the Gigabit-LX LC mini-GBIC, both of
which can be installed in the Series 2600 Switches, are Class 1 Laser Products.
Laser Klasse 1
These mini-GBICs comply with IEC 60825.
Switch Specifications
A-3