Back Of The Switch - HP ProCurve Series 2600 Installation And Getting Started Manual

Introducing the Switch

Back of the Switch

Back of the Switch
1-10
Cooling vent - make sure this is not
obstructed for proper switch operation
Conso le
Console Port
Cooling vent - make sure this is not
obstructed for proper switch operation
Conso le
EPS Input
Console Port
EPS Input
EPS Redundant Input
EPS Input
ProCurve Switch 2626 and 2650 non-PWR
ProCurve Switch 2626-PWR and 2650-PWR
HP ProCurve
RPS Input
12V 7.5A
RPS Input
ProCurve Switch 2600-8-PWR
ProCurve RPS Input
RPS Input
AC power connector
Li ne 50/60 Hz.
100-240 V~ 7.5 A
AC power connector
Multiple power sources. Disconnect
! both the AC power cord and the RPS cable
to completely remove power from the unit.
Line: 50/60 Hz
100 240 V~
3.3 A (3,3 A)
AC power
connector