Table of Contents
Advertisement
11-24
Government Approvals
The Series NC1001 modem may not be used on extension wiring which makes
use of plug pins 1 & 6. If in doubt, advice must be obtained from a competent
telecommunications engineer. Difficulties may occasionally be experienced
from other apparatus connected to the BT PSTN via the Series NC1001 modem
apparatus. Such difficulties may include the following:
Difficulty in making calls
Problems in telephone conversion being experienced by both parties to
the call
Initially, normal operation will be possible. However, changes to or
modernization of the network-taking place in the normal course of events may
result in the apparatus being connected to a network service with which it was
not designed to be compatible. Failure of the apparatus to work under these
circumstances may not be the responsibility of the network operator.
If the above mentioned difficulties are experienced, please contact your product
supplier or your Authorized Compaq Reseller in the United Kingdom.
This device is intended for auto-answering of incoming calls. Under normal
conditions callers will be accustomed to calls being answered within 10
seconds, and a majority of callers will abandon calls that are not answered
within 45 seconds.
There are several options available for auto-answering operation. The default
setting is for two incoming rings. This is the recommended setting for normal
operation by most computer users.
When entering telephone numbers, ensure that the number that appears on the
screen is correct before beginning to dial.
The following lists the modem approval statements:
1. This modem is approved as a host independent product. This approval
number is a general approval number.
2. APPROVED for connection to the telecommunications systems
specified in the instructions for use, subject to the conditions set out in
them.
3. UK Approval No.: NC1001-607883
Advertisement
Table of Contents
