Sun Microsystems AC200 User Manual page 8

Part III Troubleshooting and Maintenance
10. Troubleshooting 10-1
10.1
10.2
11. Replacing a Server or Replacing Individual Components 11-1
11.1
11.2
11.3
11.4
11.5
11.6
11.7
11.8
11.9
Part IV Appendixes
A. Configuring the LOMlite2 Device Driver A-1
A.1
A.2
B. System Board Jumper Settings B-1
viii Netra T1 AC200 and DC200 Server User's Guide • August 2001
9.3.5 Removing Driver Protection From the LOMlite2 Driver (lom -U)
9-13
9.3.6 Making the LOMlite2 Interface Backward Compatible (lom -B)
9-14
9.3.7 Upgrading the LOMlite2 Firmware
(lom -G filename) 9-14
Solutions to Problems You Might Encounter 10-2
Interpreting the Front and Back Panel LEDs 10-4
Replacing a Server 11-2
Field Replaceable Units 11-4
Replacing the Memory Card Reader for the System Configuration Card
11-5
Replacing the CD-ROM Drive, Cable, and Paddleboard 11-7
Replacing the NVRAM Chip 11-9
Replacing the System Board 11-12
11.6.1 Removing the Old System Board 11-12
11.6.2 Installing the New System Board 11-13
Replacing the Power Supply Unit 11-15
Replacing the Rear Fan Subassembly (Fans 1 and 2) 11-17
Replacing Fan 3 (CPU Fan) 11-19
The LOMlite2 Device Driver A-2
Configuring the LOMlite2 Device Driver A-3