Sun Microsystems AC200 User Manual page 4

3. Using DC Power 3-1
3.1
3.2
4. Installing Optional Hardware Components 4-1
4.1
4.2
4.3
4.4
4.5
4.6
4.7
5. Installing the Server Into a Rack 5-1
5.1
5.2
6. Connecting the Cables 6-1
iv Netra T1 AC200 and DC200 Server User's Guide • August 2001
Grounding the Netra T1 DC200 Server 3-2
Assembling the DC Power Connectors 3-3
3.2.1 The Insulated Conductors You Need to Use 3-3
3.2.2 Assembling the DC Input Power Cable 3-3
3.2.3 Installing the Strain Relief Housings 3-6
Installing and Removing Hot-Pluggable Hard Disk Drives 4-2
Opening the Netra T1 Server 4-4
Identifying Server Components 4-6
Installing and Removing a CD-ROM Drive
4.4.1 Installing a CD-ROM Drive 4-7
4.4.2 Removing a CD-ROM Drive 4-9
Installing and Removing Memory 4-9
Installing and Removing a PCI Card 4-11
4.6.1 Installing a PCI Card 4-11
4.6.2 Removing a PCI Card 4-14
Replacing the Server's Top Cover 4-15
Installing Into a 19-Inch Four-Post Rack 5-2
5.1.1 The 19-Inch Rackmounting Kit 5-2
5.1.2 Assembling the Slides and Mounting the Server 5-3
5.1.3 Fitting the Cable Management Bracket 5-10
5.1.4 Tips for Using a Sun StorEdge 72-inch Rack 5-11
Installing Into a Two-Post Relay Rack 5-12
5.2.1 The Fixed Mounting Bracket Kit 5-12
5.2.2 Attaching the Fixed Mounting Brackets 5-12
4-7