Solutions To Problems You Might Encounter - Sun Microsystems AC200 User Manual

10.1 Solutions to Problems You Might
Encounter
Problem: Cannot Set Up a Console Connection to the Server
The Netra t1 server's serial port pinouts are listed in Chapter 6. Check that they are
correct for the device (that is, the terminal or terminal server) that you are
connecting to the Netra t1.
Problem: Cannot Display the lom> Prompt Using the "#." Escape
Sequence
Check whether the first character of the "#." escape sequence has been changed (this
is a user-configurable value). To check the current value, type the following from the
Solaris prompt:
# lom -c
The information that this command displays includes the "serial escape character".
If this is not "#", then type the character that is currently specified and follow it
immediately with a dot.
Problem: Cannot Turn Serial Event Reporting On and Off
Problem: Cannot Receive Clearly Formatted LOMlite2 Output
Problem: Cannot Reprogram the LOMlite2 Device
If you have reinstalled the Solaris 8 operating environment onto your server and
have also reinstalled the LOMlite2 software from the support CD supplied with
Solaris 8 (entitled Software Supplement for the Solaris 8 Operating Environment), you
need to apply patch 110208-xx. This patch is available on SunSolve
10-2 Netra T1 AC200 and DC200 Server User's Guide • August 2001
SM
.