Sun Microsystems AC200 User Manual page 6

8.3
8.4
8.5
8.6
8.7
vi Netra T1 AC200 and DC200 Server User's Guide • August 2001
8.2.3 Exiting From the lom> Prompt 8-5
8.2.4 Resetting the Server 8-5
8.2.5 Displaying the ok or kadb Prompt 8-6
8.2.6 Controlling the Server's Booting Behavior 8-6
Monitoring the Server From the LOMlite2 Shell 8-8
8.3.1 Checking How Long the Server Has Been Running 8-8
8.3.2 Checking the Current Status of All Components 8-8
8.3.3 Viewing the LOMlite2 Device's Event Log 8-10
8.3.4 Checking That a Component Has Been Fixed 8-12
Setting Up LOMlite2 Privileges for Named Users 8-13
8.4.1 Permissions Available for LOMlite2 Users 8-13
8.4.2 Creating a LOMlite2 User Account 8-14
8.4.3 Specifying the Password for a LOMlite2 User Account 8-14
8.4.4 Viewing Details of a LOMlite2 User Account 8-15
8.4.5 Changing Your Own User Password 8-15
8.4.6 Deleting a LOMlite2 User Account 8-15
8.4.7 Specifying Permissions for a Named User 8-16
8.4.8 Quitting a LOMlite2 Named User Session 8-17
Setting the LOMlite2 Device's Configurable Variables 8-17
8.5.1 Turning the Fault LED on 8-17
8.5.2 Turning the Fault LED off 8-17
8.5.3 Setting the alarmon n Software Flag 8-18
8.5.4 Setting the alarmoff n Software Flag 8-18
8.5.5 Stopping the LOMlite2 Sending Event Reports to the Serial
A/LOM port 8-18
Separating the LOMlite2 From the Console on the Serial A/LOM Port 8-
19
8.6.1 Dedicating Serial A/LOM to the LOMlite2 8-19
8.6.2 Sharing Serial A/LOM Between the LOMlite2 and the Console 8-
20
Viewing the Event Reports That the LOMlite2 Sends to syslogd 8-20