Sun Microsystems AC200 User Manual page 5

6.1 Connecting the Cables to the Server 6-2
6.2 Using a Single DC Power Cord 6-4
6.3 Setting Up Serial Connections 6-4
6.3.1
6.3.2
6.3.3
6.3.4
6.4 Connecting to the Netra T1 Server From a Laptop Running Microsoft
Windows 6-10
6.4.1
6.4.2
7. Powering On the Netra T1 Server 7-1
7.1 Preparing to Configure the Server 7-2
7.1.1
7.1.2
7.2 Powering On the Server 7-3
7.2.1
7.2.2
7.2.3
7.2.4
7.3 Using the Power (On/Standby) Switch 7-8
Part II Remote and Local Management
8. Managing the Netra T1 Server From the lom> Prompt 8-1
8.1 Introduction to Lights-Out Management 8-2
8.2 Powering On or Resetting the Server From the LOMlite2 Shell 8-3
8.2.1
8.2.2
Connecting to a Terminal Server 6-6
Using a DB-25 Adapter for Your Serial Link 6-8
Using a DB-9 Adapter for Your Serial Link 6-9
Settings for the Serial Connections 6-10
Connecting the Netra T1 Server to the Laptop 6-10
Using Microsoft Windows HyperTerminal 6-12
Configuring Using a Terminal Server 7-2
Configuring From a Terminal or Workstation 7-2
Powering On for the First Time With the Server's Details Registered
at a Name Server 7-3
Powering On the Server for the First Time Without Having Its
Details Registered 7-4
Powering On a Standalone Server for the First Time 7-6
Clearing Your Configuration and Starting Again 7-7
Powering the Server On or Down to Standby Mode 8-4
Displaying the lom> Prompt 8-4
Contents v