T5: Creating A Label With Rotated Text, Printing Multiple Copies - Brady TLS2200 User Manual

T5: Creating a Label with Rotated Text, Printing Multiple Copies

Note: This example assumes you have marker roll PTL-19-423 loaded in your printer.
Label to be printed:
Setup Status:
H Justify
V Justify
Rotation
Format
Check the Status Bar to make sure the unit is in Component mode. If not, press <Shift>
1.
+ <Wire> to toggle from Wiremarker mode to Component mode.
Press <Shift> + <Form Clear> to delete all lines of text and reset the font to the default
2.
size of 9.
Press <Func> + <Setup> to access the Setup Menu.
3.
Press <
▼
4.
With the cursor highlighted on Rotation, press <Enter>.
5.
Press the <
6.
Press <Enter>.
7.
Press <Func> + <Exit> to exit back to the text editor screen.
8.
Press <Shift> + <
9.
10. Enter ROTATE on line one, then press <Enter>.
11. Enter TEXT on line two.
12. Press <Func> + <Multi Print>.
13. When "No. of Copies?" prompt appears, enter 3.
14. Press <Enter>. The printer prints three copies of the legend created above.
42
Center
Center
0 Degrees
Component
> three times to move to the Style sub-menu, then press <Enter>.
> key once to select 90 Degrees.
▲
> once to increase the font size to 10.
▲
™
TLS2200 Thermal Transfer Printer User Manual